Pitney Bowes J693 Bedienungsanleitung PDF herunterladen (Seite 70)

60 J693

5.6.1 Updating from the Ready Mode

Update Procedure for Application Version 2.091 or greater

Step Displayed Message Operator Action Comment(s)

Using the DOS

copy command

(where ‘filename’

is the program to

be loaded and

‘lpt1’ is the

selected interface

port), enter the

following:

copy filename lpt1:

As an example, this would be

entered as:

copy

4212tb10_0304.zs lpt1:

(where ‘lpt1’ is the host

computer’s port; however,

this selection can differ to

include a serial or other port,

as the printer is equipped).

The Ready Indicator will

flash while the data is

received.

No action required. The new application program

is being stored and verified.

No action required. The printer has reset

automatically and is now

displaying the new firmware

version.

No action required. The new application is now

running.

Note: If ‘Uncalibrated’ or

‘Position Fault’ is displayed,

the printer will have to be

calibrated (see Section

5.2).

1 2 ... 65 66 67 68 69 70 71 72 73 74 75 ... 108 109

Keine Kommentare

Pitney Bowes J693 Bedienungsanleitung Seite 70